Electrical Panel failure is one of the biggest fears of managers. It’s because these panels have the responsibility of power supply in industrial as well as commercial sectors. Therefore, failure, even for a second creates a big trouble for such industries. There are many reasons behind this power failure before any serious production or safety issue arises at your site. You can only prevent yourselves from such issue when you know the actual root cause of this problem. Don’t panic, here are the reasons for such failure and their prevention is also mentioned below. Have a look and use them well to overcome this situation and to protect your industry from any such damage.
Power Spikes And Surges: Voltage spikes and surges is a very common thing in electrical components, however, to avoid them, there is surge suppressor installed in the Electrical Panel, which stands for a longer time against this situation. Some of the manufacturers never installed this in the device, which in result it doesn’t work properly. To avoid this situation you have to make sure that the products you buy have a line reactor in it.
Tripped Breakers: Another common reason behind the electrical panel failure is the problem of overloading. It’s because if this device gets overloaded so it usually causes a blown fuse. Always make sure you will put a load on this device, which it can handle conveniently.
Grounded Wires In The Conduit Systems: Many types of material used in its installation which may damage by coming in contact and can cause blown fuse, short-circuit, fire accident etc. that could seriously harm the man and machinery of your industry. Prevention of such problem can be only possible by the time to time inspection and maintenance of these electrical panels to ensure they are working trouble-free.
Loose Wires: Loose or disconnected wires can also be the reason of power failure and to prevent it you have to make sure the electrical panel you buy get installed by a technical person than a handyman. Always double-check the wires and other connections properly before start working with them to avoid any such situation.
Any of the above points can be the reason of this power failure and therefore you should take proper actions to avoid them. It’s because prevention is always better than cure. For this, you need to buy a right product from trusted Electrical Panel manufacturers, who give quality product without compromising the quality and also provide professional installation services to you.
AUTOPOST by BEDEWY
